5 Kit Stylist Form
Welcome to the PURA LUXE PROTEIN SMOOTHING TREATMENT Certification PROGRAM
STEP 1
Once you've absorbed the information provided here, you will understand why PURA LUXE TREATMENTS are truly customizable for ALL NATURAL HAIR TYPES.
PURA LUXE Treatment Options
Smooth & Straight
Reduce the Frizz
Repair & Heal Only
Treatment - Smooth
Step 1 - Wash
Wash clients hair with shampoo only (no conditioner, no product) & Dry hair 100%
Step 2 - Apply Treatment
Divide dried hair into 4 sections and apply treatment to the hair (like you would color) in 1/2"-1" Sections using a color brush. Then use a wider tooth sized tail comb to comb the product through the hair, insuring that the treatment was applied evenly and thoroughly to the hair. - Formula : Ratio - 80 gram (3 oz) smoothing treatment Base + 8 gram (0 .3 oz) Protein boost + (add 3 gram (0.11 oz) of purple Gloss for blondes or Gray )
Saturate the hair with a brush /color applicator
For more resistant and coarse hair (increase the Protein Boost amount up to 24gram (1 oz) per 80 grams Base Treatment
Step 3 - Process Time
Under the Infrared Lamp for 30 minutes
Place the client directly under the lamp ( with no cap) making sure that the lamp arms are positioned so that heat is applied all over the head, with a focus on the more resistant curly hair.
Place lamp 7" - 10" away from head.
This step allows for the product to penetrate the hair
For Coarse, Curly Resistant hair , increase the time under the lamp by 15 minutes AND 25-30 minutes with NO HEAT
If hair is Finer, thinner texture then you can reduce the No Heat time by10- minutes
Step 4 - Rinse & Dry
Rinse hair with warm water only for a few minutes to remove the treatment & dry hair 100%
Rinse as well as you can in order to get as much product out as possible.
Step 5 -Flat Iron
Divide dried hair into 4 sections and begin to flat iron ( 1/2"-1" sections)
Titanium Flat Iron ONLY !
Iron heat at 450 degrees
For damaged hair reduce heat, 310-410 degrees for blondes and over processed hair.Use common sense! (if you need to REDUCE the HEAT then INCREASE PASS count if you feel that the hair can handle it.
9-11 passes with the flat iron. Make sure you work slow & thorough
If you see static then stop flat ironing that section even if you did not reach the 9-11 passes.
After flat iron options:
You can continue to step 6
Color hair, highlight hair
Send her home , to the gym, or to the pool
Step 6 - Rinse & Repair (optional)
Rinse hair with water only & apply Protein Repair (like a mask) for 5 minutes in the sink & dry 100%
This step allows you and the client to see the actual final results.
It also allows you to fix any area that you missed with the iron and may still be curly or frizzy , you simply go over it again with the flat iron (5-7 passes) . No need to re apply the treatment if this step is done NO MORE then 30 Minutes after the final rinse ! *I like to call this step INSURANCE for the Stylist!
Treatment - Reduce The Frizz
Step 1 - Wash
Wash clients hair with shampoo only (no conditioner, no product) & TOWEL DRY hair
Step 2 - Apply Treatment
Divide dried hair into 4 sections and apply treatment to the hair (like you would color) in 1/2"-1" Sections using a color brush. Then use a wider tooth sized tail comb to comb the product through the hair, insuring that the treatment was applied evenly and thoroughly to the hair.
Formula:Ratio - 80 gram (3 oz) smoothing treatment + (add 3 gram (0.11 oz) of purple Gloss for blondes or Gray) - Saturate the hair with a brush /color applicator
Step 3 - Process Time
Client must sit under the Infra Red LAMP for 30 minutes or (55 minutes NO HEAT)
Place the client directly under the lamp ( with no cap) making sure that the lamp arms are positioned so that heat is applied all over the head, with a focus on the more resistant curly hair. Keep lamp 7"-10" away from head. - this step allows for the product to penetrate the hair
Step 4 - Rinse & Dry
Rinse hair with warm water only to remove the treatment & dry hair 100%
Step 5 -Flat Iron
Divide dried hair into 4 sections and flat iron ( 1/2" - 1" sections) -Titanium Flat Iron ONLY !
Iron heat at 415 - 450 degrees
For damaged over processed hair reduce heat, ( 310-410 degrees) Use common sense! (if you need to REDUCE the HEAT then INCREASE PASS count if the hair can handle it.
6-8 passes with the flat iron. Make sure you work slow & thorough
If you see static then stop flat ironing that section even if you did not reach the 6-8 passes.
After flat iron options:
You can continue to step 6, 2
Color her highlight her
Send her home , to the gym, or to the pool
Step 6 - Rinse & Repair (optional)
Rinse hair with water only & apply Protein Repair (like a mask) for 5 minutes & dry 100%
This step allows you and the client to see the actual final results.
It also allows you to fix any area that you missed with the iron and may still be curly or frizzy , you simply go over it again with the flat iron (5-7 passes) . No need to re apply the treatment if this step is done NO MORE then 30 Minutes after the final rinse ! *I like to call this step INSURANCE for the stylist!
Treatment - Repair & Heal Only
Step 1 - Wash
Wash clients hair with shampoo only (no conditioner, no product) & Towel Dry hair
Step 2 - Apply Treatment
Divide dried hair into 4 sections and apply the treatment to the hair (1/2" - 1" Sections)
Formula Ratio -40 gram smoothing treatment base + 40gram Repair +(add 3 gram (0.11 oz)of purple Gloss for blondes or Gray hair )
Step 3 - Process Time
Client must sit with no heat for 30 minutes only if the hair is extremely damaged or over processed.
If the hair is in a healthier state then they can sit under the Infrared lamp for 30 minutes Only.
This step allows for the product to penetrate the hair
Step 4 - Rinse & Dry
Rinse hair with warm water only to remove the treatment
Step 5 - Dry
Round Brush Blowdry to seal and finish the look.
After Care:
Make sure that the client uses a conditioning mask 1 time per week moisturize the hair. We also encourage using a Sulfate Free shampoo to assist with treatment longevity. It is also nice for them to use a light serum after a rough dry to smooth out any split ends the client may have from previous color, bleach or heat damage.
SAFETY INFORMATION
DO NOT INGEST. IF SWALLOWED, DO NOT INDUCE VOMITING, SEEK MEDICAL ATTENTION. AVOID EYE CONTACT. KEEP OUT OF REACH OF CHILDREN. IF REDNESS OR OTHER SIGNS OF ADVERSE REACTION OCCUR, DISCONTINUE USE IMMEDIATELY . IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION.
This material is for educational purposes only.
Copyright 2023 Osher Inc.
Proceed to take the test
1. Did you review all Information at https://www.pura-luxe.com, including Education & FAQ's?
Please select the best answer.
2. Who would be considered a good candidate for the PURA LUXE PROTEIN SMOOTHING TREATMENT? Those with:
Please select the best answer.3. PURA LUXE NON TOXIC PROTEIN SMOOTHING SYSTEM is:
Please select the best answer.4. The Active ingredient in the PURA LUXE PROTEIN SMOOTHING TREATMENT, that is used in place of FORMALDEHYDE to disrupt the curl, is:
Please select the best answer.5. In STEP 1 of Applying any PURA LUXE treatment, what type of shampoo is used to clean the hair?
Please select the best answer.6. When applying the PURA LUXE PROTEIN SMOOTHING TREATMENT REDUCE FRIZZ ONLY (Option #2), you want the hair to be _____ dried for the solution to absorb properly and spread evenly.
Please select the best answer.7. When applying the PURA LUXE PROTEIN SMOOTHING TREATMENT for the SMOOTH / STRAIGHT (Option #1), you want the hair to be _____% Dry for the solution to absorb properly and spread evenly.
Please select the best answer.8. What is the client wait time for Step 3 of the Smoothing/Straight option?
Please select the best answer.9. AFTER the PURA LUXE TREATMENT has been applied to the hair and the client has sat under the infrared lamp and/or air dried for the appropriate amount of time, you will:
Please select the best answer.10. When doing Pura Luxe Treatment option #3 Repair & Heal, make sure that the hair is shampooed and _____ dried before formula application.
Please select the best answer.11. For any REDUCE FRIZZ treatment option. you will Pass over each section of hair with the flat iron at least __ to __ times. Please note the smaller the sub-section, and the more passes with the flat iron, the smoother the end result will be, and vice-versa.
Please select the best answer.12. For the SMOOTH / STRAIGHT Treatment Option #1 you will Pass over each section of hair with the flat iron at least __ to __ times.
Please select the best answer.13. What is the client wait time for Step 3 in a REDUCE FRIZZ Only Treatment?
Please select the best answer.14. What is the benefit of doing (Optional) Step 6 of the Pura Luxe Treatment?
Please select the best answer.15. Can you perform the PURA LUXE PROTEIN SMOOTHING TREATMENT on a client that has extensions in his/her hair?
Please select the best answer.16. Once you have finished performing the PURA LUXE PROTEIN SMOOTHING TREATMENT, we recommend the Client use the following After Care products to maintain and extend their treatment.
Please select the best answer.17. We recommend Clients color their hair _____ their PURA LUXE TREATMENT.
Please select the best answer.18. How many treatment options does Pura Luxe offer?
Please select the best answer.Thank you for taking our PURA LUXE CERTIFICATION TEST.
Thank you for taking our PURA LUXE CERTIFICATION TEST.
Thank you for taking our PURA LUXE CERTIFICATION TEST.
Thank you for taking our PURA LUXE CERTIFICATION TEST.
Thank you for taking our PURA LUXE CERTIFICATION TEST.